Es gibt z.Z. Probleme mit einem Update, es ist nur Lesen möglich.
Currently there are issues with the installation, readonly possible for now.

Puzzle pieces

From Jigsaw-Wiki
Revision as of 08:18, 10 April 2017 by Mac gc (talk | contribs)
Jump to: navigation, search
Language: English  • Deutsch

Classification of puzzle pieces

The most common form of puzzle pieces are interlocking pieces made of cardboard. Other shapes or materials have been added in many variations in recent years.

Schematical illustration interlocking puzzles

Pieces of cardboard

The quality of the parts depends very much on the manufacturer. The thickness of the parts should be approx. 2 mm so that they do not buckle too quickly and interlock better. The different puzzle piece shapes in a puzzle also show the quality: many different shapes show a better quality as the effort is greater than for unit forms.

The production of the cardboard pieces usually are done by punching: sharp blades are placed in the form of the pieces on the punching tool and thus the cardboard with the motif is punched. For puzzles with about 3.000 pieces and upwards, a punching tool is usually used several times per puzzle (usually approx. 1.000 pieces) so that many pieces are completely identical in shape (refer to Stanzwiederholung).

The unprinted rear side of the puzzle pieces can consist of differently colored cardboard. This can differ from manufacturer to manufacturer and also in the year of manufacture and has no influence on the quality of the puzzle pieces.

Puzzle pieces of cardboard (rear side)

Parts of plastic

Many 3D-Puzzle are made of 3-4 mm thick foam with the attached motif. Puzzle balls consist of slightly curved plastic pieces. Crystal puzzles are usually transparent plastic pieces, which must be superimposed in layers on each other. There are also normal puzzles, where plastic is used.

Transparent pieces of plastic

Pieces of wood

The first puzzles were sawn from thin plywood with a hand saw (therefore Jigsaw). Nowadays, puzzles for adults with many pieces (> 1.000) are less common, since the production is usually done manually and thus the price compared to normal puzzles is also much higher. Unlike normal cardboard puzzles, Wooden puzzles are usually single pieces or small series. The pieces are cut into their shape by means of an electric saw or a laser. This allows individual pieces and the so-called Whimsies.

Wooden puzzle with individual cut and Whimsies

Pieces of metal

Some 3D-puzzles are assembled with cut-out light alloy pieces by interlocking. A tool kit is not necessary for this.

Size comparison

PuzzleTeileVergleichGroesse.jpg

  1. Ravensburger, 1000 pieces, year 2000-
  2. Schmidt, 1000 pieces, year 2000
  3. Heye, 1000 pieces, year 2009
  4. Clementoni, 1000 pieces, year 2014
  5. Ravensburger Family Puzzle, 942 pieces, year 2007
  6. MB, 300 pieces, year 1971
  7. White Mountain, 1000 pieces, year 2008
  8. Ravensburger, Senior Puzzle, 800 pieces, year 1972
  9. Sunsout, 2000 pieces, year
  10. Educa, 1000 pieces, year 2006
  11. Ravensburger, Puzzleball, 240 pieces, year 2004
  12. Educa, Minipuzzle, 1000 pieces, year 1997
  13. Ravensburger, Micropuzzle, 204 pieces, year
  14. Castorland, 4000 pieces, year 2013
  15. Castorland, 3000 pieces, year 2012
  16. Jumbo, WASGIJ, 1000 pieces, year
  17. Konturpuzzle, 800 pieces, year
  18. Ravensburger, 500 pieces, year 1973
  19. MB, Corona rund, 1000 pieces, year
  20. play time, 1000 pieces, year
  21. Arrow Games, 3000 pieces, year
  22. Falcon, 5000 pieces, year 1987

Thickness of puzzle pieces

Comparison manufacturer